Sea Recovery's Watermakers for Commercial and Industrial Use-Tasman Seas

To see the various accessories available for the Tasman Seas, click on Accessories.

Features


	High efficiency Booster Pump to provide the needed flow and to produce over 30 lbs. of pressure entering the pre-filtration section. Multi Media Filter traps suspended solids. Extended Life Step Down Dual Parallel/Series Pre-filtration. Unique Low Voltage Control Circuitry. Exclusive Solid Salinity Meter shows actual product water quality, an essential tool for product water monitoring. A failsafe Product Water Diversion Valve that will allow only safe drinking water to enter storage tanks. This prevents salty water (bad water) from contaminating your fresh water supply. Dedicated heavy duty Magnetic Latching Relays for each motor integrated in the system. The Tasman Sea Systems are shipped from the factory ready to install and function. There are no optional items required, and a complete installation kit is also included. Corrosion proof Hour Meter for keeping accurate ship's logs & for timely preventative maintenance. Clear inspectable Sea Strainer constructed with a cleanable Monel Mesh Screen filter for ultimate corrosion resistance and large particulate removal. Vibration Isolation Mounts Included. The Tasman Sea Series Stainless Steel High Pressure Pump is specifically designed for Sea Water Reverse Osmosis Applications.		Fiberglass Reinforced High Pressure Membrane Vessel eliminates corrosion, is stronger, and more durable. Commercial grade Membrane Element yields higher recovery with greater rejection for more water of higher quality. Flow Meters for visual monitoring of the product water flow and feed water flow used to calculate production rates and operation of the system. The Compact Design reduces installation space and provides more water in a smaller foot print. Remote Controls available. High Grade Crank Case Oil to provide longevity of the high pressure pump. Stainless Steel exterior and interior Pressure Gauges for accurate measurement of system functions, corrosion resistant, and liquid filled for accurate needle reading. All High Pressure Connections are 316 Stainless Steel for maximum corrosion and rust resistance. A comprehensive Owner's Manual with exact parts and connection drawings for installation, operation, maintenance, and other pertinent guidelines. Worldwide Service and Sales Network for immediate attention regardless of location. One-Year Warranty on the System and Membranes. Full technical service dedicated to system performance excellence.


Specifications

RATED PERFORMANCE / PRODUCT WATER PRODUCED:
+-15% at 820 PSIG / 56 BAR, 77^oF / 25^oC & 35,000 PPM TDS typical sea water

Model #	Per Hour	Per Day	Weight of System
21m3 HR/S1 38m3 HR/S1 53m3 HR/S1 64m3 HR/D1 72m3 HR/D1 79m3 HR/D1 38m3 HR/S2 64m3 HR/S2 79m3 HR/S2	229 gal/867 lit 417 gal/1,577 lit 583 gal/2,208 lit 708 gal/2,681 lit 792 gal/2,997 lit 875 gal/3,312 lit 417 gal/1,577 lit 708 gal/2,681 lit 875 gal/3,312 lit	5,500 gal /20,820 lit 10,000 gal/37,854 lit 14,000 gal/52,996 lit 17,000 gal/64,352 lit 19,000 gal/71,923 lit 21,000 gal/79,493 lit 10,000 gal/37,854 lit 17,000 gal/64,352 lit 21,000 gal/79,493 lit	1900 lbs/864 Kg 2000 lbs/909 Kg 2100 lbs/954 Kg 2300 lbs/1045 Kg 2400 lbs/1090 Kg 2500 lbs/1136 Kg 2000 lbs/909 Kg 2200 lbs/1000 Kg 2400 lbs/1090 Kg

SALT REJECTION (CHLORIDE ION): Minimum 99.2%, Average 99.5%

PRODUCT WATER TEMPERATURE: Ambient to feed water temperature

SALINITY MONITORING: Automatic electronic monitoring. Temperature compensated with solid state "DOT LED" continuous readout in micromhos per cm3 and of a fail-safe design.

SALINITY RANGE: Designed for Seawater use up to 50,000 ppm TDS (NaCl) (typical seawater salinity is 35,000 ppm)

TEMPERATURE RANGE: Max. 122^oF / 50^oC, Min. 33^oF / .5^oC

SYSTEM FEED WATER:
FLOW: 30 gpm / 114 lpm

REVERSE OSMOSIS MEMBRANE: Selected High Rejection / High Yield aromatic tri-polyamid, thin film composite, spiral wound, single pass reverse osmosis membrane high rejection element. SW suffix uses Sea Water Elements, and HR suffix uses High Rejection Elements.

CHLORINE TOLERANCE: 0.1 ppm

pH RANGE: 3-11 (typical seawater pH is 8)

SYSTEM PRESSURE:

Feed Water:	Minimum:	15 psi / 1 bar / 1 Kg/cm²
	Maximum:	50 psi / 3.45 bar / 3.5 Kg/cm²

System Operation: Seawater @ 35,000 ppm & 77^oF / 25^oC
Nominal: 820 psi / 57 bar / 58 Kg/cm². (Brackish varies w/ppm)

EXTERNAL INSTALLATION WATER CONNECTIONS: Pipe sizes to be supplied by the installer for connection of the Sea Recovery supplied components. The below threaded flanges are all American Standard.

Inlet:	1-1/2" Flange
Brine:	1-1/2" Flange
Product:	1" Flange

ELECTRICAL POWER REQUIREMENTS: (HP = Horse Power; FLA = Full Load Amperes; LRA = Locked Rotor Amperes - Start Up)

HIGH PRESSURE PUMP ELECTRIC MOTOR THREE PHASE:

Hz	VAC	HP	FLA	LRA
50	220	30 & 2	56	390
50	380	30 & 2	28	198
50	415	30 & 2	26	180

60	208	30 & 2	57	390
60	230	30 & 2	52	370
60	460	30 & 2	26	185

BOOSTER PUMP & FEED WATER PUMP ELECTRIC MOTORS THREE PHASE:

Hz	VAC	HP	FLA	LRA	Hz	VAC	HP	FLA	LRA
50	220	1.5	6	38	50	220	2	6	44
50	380	1.5	3	19	50	380	2	3	22
50	415	1.5	3	18	50	415	2	3	20
60	208	1.5	6	38	60	208	2	6	42
60	230	1.5	5	34	60	230	2	6	38
60	460	1.5	2.5	17	60	460	2	3	19

Hz	VAC	HP	FLA	LRA	Hz	VAC	HP	FLA	LRA
50	220	3	8	64	50	220	5	13	108
50	380	3	4	32	50	380	5	7	54
50	415	3	4	30	50	415	5	7	52
60	208	3	9	64	60	208	5	14	110
60	230	3	8	58	60	230	5	13	100
60	460	3	4	29	60	460	5	7	50

RECOMMENDED CIRCUIT BREAKER: The actual final system configuration may have a large or different size Feed Water Pump and Booster Pump therefore size your Circuit Breaker accordingly. The below chart is an approximation assuming 3 horse power Feed Water and 3 horse power Booster Pumps.

Operating Voltage Hz & Phase		Recommended Circuit Breaker Size System With Feed Water & Booster Pump		Recommended Circuit Breaker Size System With Only Booster Pump
220 VAC, 50 Hz, 3 Phase 380 VAC, 50 Hz, 3 Phase 415 VAC, 50 Hz, 3 Phase 208 VAC, 60 Hz, 3 Phase 230 VAC, 60 Hz, 3 Phase 460 VAC, 60 Hz, 3 Phase		90 Amperes 50 Amperes 50 Amperes 90 Amperes 90 Amperes 50 Amperes		75 Amperes 75 Amperes 40 Amperes 75 Amperes 75 Amperes 40 Amperes

Fort Lauderdale	954-463-2288	Toll Free: 800-663-7561	[email]
Palm Beaches	561-881-9598	Toll Free: 800-348-9637	[email]
Savannah, GA	912-356-5222	Toll Free: 800-286-2674	[email]


	Small hotels, large villas, oil platforms, and small cruise ships with 100 to 200 passengers aboard require from 5,500 to 21,000 U.S. gallons (20,820 to 79,493 litres) of fresh water per day. Sold as a complete package, Sea Recovery offers the"Tasman Sea" Series to satisfy these watermaking requirements. Found throughout the world, these easily maintained reverse osmosis desalinators produce large quantities of fresh water with unsurpassed reliability. The reason can be traced to Sea Recovery's unique engineering abilities and total commitment to high quality products. Sea Recovery delivers complete R.O. systems, ready to produce water immediately after installation. All necessary plumbing for onboard use is also included.