| Watermakers/Parts | Service/Support | Locations | News | Contact | Home |
|
![]() Fort Lauderdale · Palm Beach · Savannah |
![]() |
The Aqua Whisper Compact Desalinator is 31% smaller than the Aqua Whisper Frame, yet still retains the identical watermaking capabilities. This reduction in size is achieved by redesigning the high efficiency booster pump so it may be remote mounted at a location closer to the seacock. This new compact size watermaker allows for easy installation in yachts previously without adequate space to quarter the larger Aqua Whisper Frame. 19, 29, 38, 58, 75 U.S. gallons per hr |
| Model | GPD | Volt/Ph/Hz |
| AWC- (Aqua Whisper Compact) | 450-1 | 230/1/60 |
| AWC- (Aqua Whisper Compact) | 700-1 | 230/1/60 |
| AWC- (Aqua Whisper Compact) | 900-1 | 230/1/60 |
| AWC- (Aqua Whisper Compact) | 900-2 | 230/1/60 |
| AWC- (Aqua Whisper Compact) | 1400-2 | 230/1/60 |
| AWC- (Aqua Whisper Compact) | 1800-2 | 230/1/60 |
450 to 1800 U.S. gal. (1,703 to 6,814 litres) per day
19 to 75 U.S. gal. (71 to 284 litres) per hour
![]()
|
The Aqua Whisper Compact Desalinator is only 14 inches tall allowing installation in tighter areas. Such locations range from spaces under berths or settees and inside closets or engine room compartments. The supplied external Booster Pump may be mounted closer to the feed water source for immediate water flow and no loss of prime. Recommended for all Boats and Yachts, the Aqua Whisper Compact is available in six (6) configurations to produce from 450 to 1800 U.S. gallons (1,703 to 6,814 liters) per day or 19 to 75 U.S. gallons (71 to 284 liters) per hour of fresh, pure water. The newly engineered open tubular frame allows for easy access to the Aqua Whisper Compact's internal components during scheduled maintenance. |
||||
![]() |
||||
|
Features
|
|
|
|||
To see the various accessories available for the AWC, click on Accessories.
| Specifications | ||
PERFORMANCE:
RATED PERFORMANCE / PRODUCT WATER PRODUCED:
+-15% at 820 PSI / 57 BAR, 77oF / 25oC & 35,000 PPM TDS typical sea water
|
Model #
|
Per Hour
|
Per Day
|
Weight of System
|
|
|
AWC 450-1
AWC 700-1 AWC 900-1 AWC 900-2 AWC 1400-2 AWC 1800-2 |
19 gal/71 lit
29 gal/110 lit 38 gal/142 lit 38 gal/142 lit 58 gal/221 lit 75 gal/284 lit |
450 gal /1,703 lit 700 gal/2,650 lit 900 gal/3,407 lit 900 gal/3,407 lit 1400 gal/5,300 lit 1800 gal/6,814 lit |
147 lbs/67 Kg
150 lbs/68 Kg 152 lbs/69 Kg 159 lbs/72 Kg 165 lbs/75 Kg 170 lbs/77 Kg |
SALT REJECTION (CHLORIDE ION): Minimum 99.2%, Average 99.4%
PRODUCT WATER TEMPERATURE: Ambient to feed water temperature
SALINITY MONITORING: Automatic electronic monitoring. Temperature compensated with the solid state continuous "Bar LED" readout. The salinity monitoring components of the system give a continuous TDS readout in micromhos per cubic centimeter, are temperature compensated and of a fail safe design.
SALINITY RANGE: Designed for Seawater use up to 50,000 PPM TDS (NaCl) (typical seawater salinity is 35,000 ppm)
TEMPERATURE RANGE: Max. 122oF / 50oC, Min. 33oF / .5oC
SYSTEM FEED WATER: FLOW: 3.0 - 4.2 gpm / 11.4 - 15.9 lpm (depending on system)
REVERSE OSMOSIS MEMBRANE: Selected High Rejection/High Yield aromatic tri-polyamid, thin film composite, spiral wound, single pass, high rejection reverse osmosis membrane element.
CHLORINE TOLERANCE: 0.1 PPM
pH RANGE: 3-11 (typical seawater pH is 8)
SYSTEM PRESSURE: FEED WATER: Maximum 35 psi / 2.41 bar / 2.46 Kg/cm2
SYSTEM OPERATION: Seawater nominal 820 psi / 56.5 bar / 57.66 Kg/cm2 Brackish Varies w/PPM
EXTERNAL INSTALLATION WATER CONNECTIONS: Pipe sizes to be supplied by the installer for connection of the Sea Recovery supplied components. The below pipe threads are all American Standard.
| Feed Inlet: | 3/4" FNPT Female National Pipe Thread |
| Brine Discharge: | 1/2" FNPT Female National Pipe Thread |
| Product: | 3/8" MNPT Male National Pipe Thread |
Models 450-1 & 900-2:
| Phase | Hz | VAC | HP | FLA | LRA | ||
| Single | 50 | 110 | 2.2 | 21 | 121 | ||
| Single | 50 | 220 | 2.2 | 11 | 61 | ||
| Three | 50 | 220 | 3.0 | 9 | 78 | ||
| Three | 50 | 380 | 3.0 | 5 | 39 | ||
| Single | 60 | 115 | 2.2 | 18 | 94 | ||
| Single | 60 | 230 | 2.2 | 9 | 47 | ||
| Three | 60 | 230 | 3.0 | 8 | 70 | ||
| Three | 60 | 460 | 3.0 | 4 | 35 |
Models 700-1 & 1400-2, and 900-1 & 1800-2:
| Phase | Hz | VAC | HP | FLA | LRA | ||
| Single | 50 | 110 | 2.2 | 21 | 121 | ||
| Single | 50 | 220 | 2.2 | 11 | 61 | ||
| Three | 50 | 220 | 3.0 | 9 | 78 | ||
| Three | 50 | 380 | 3.0 | 5 | 39 | ||
| Single | 60 | 115 | 2.6 | 21 | 109 | ||
| Single | 60 | 230 | 2.6 | 11 | 55 | ||
| Three | 60 | 230 | 3.0 | 8 | 70 | ||
| Three | 60 | 460 | 3.0 | 4 | 35 |
| Phase | Hz | VAC | HP | FLA | LRA | ||
| Single | 50/60 | 115 | 1/2 | 7.4 | 34 | ||
| Single | 50/60 | 220/230 | 1/2 | 3.7 | 17 | ||
| Three | 50/60 | 220/230 | 1/2 | 2 | 12 | ||
| Three | 50/60 | 380/460 | 1/2 | 1 | 6 |
RECOMMENDED CIRCUIT BREAKER: The final system configuration may have a large or different size Booster Pump therefore size your Circuit Breaker accordingly. The below chart is an approximation assuming standard pumps.
|
Operating Voltage Hz & Phase
|
Recommended Circuit Breaker Size |
||
|
115 VAC, 50 Hz, Single Phase |
35 Amperes |
|
|
|
|
|
|
Back to the Watermakers Catalog
|
| Fort Lauderdale | 954-463-2288 | Toll Free: 800-663-7561 | [email] |
| Palm Beaches | 561-881-9598 | Toll Free: 800-348-9637 | [email] |
| Savannah, GA | 912-356-5222 | Toll Free: 800-286-2674 | [email] |