Watermakers/Parts Service/Support Locations News Contact Home
Beard Marine Watermakers and Purification Beard Marine reverse osmosis watermakers
Fort Lauderdale · Palm Beach · Savannah 		 
 


Seafari 170 & 350
SF 170 & 350
170 & 350 U.S. Gallons Per Day (644 & 1,325 Liters)
7 & 27 U.S. Gallons Per Hour (27 & 55 Liters)
You now gain the luxury of high quality in a smaller capacity watermaker. The HRO Seafari 170 & 350 (SF 170 & 350) produces 7 & 15 gallons of fresh water per hour (27 & 55 lph) and contains the most advanced features, equipment, and benefits available on any reverse osmosis watermaker of its size. It is manufactured with a low maintenance design for easy use and simple routine service. The Seafari 170 & 350 are the most cost effective and dependable way to solve your fresh water needs. Enjoy drinking water with no worries!

Seafari ...an adventure like no other!
Horizon Seafari 170
SYSTEM GPH/LPH GPD/LPD
170 GPD Seafari 7/27 170/644
170 Seafari Sailor Package A $742 Value which includes:
H2521210001 Charcoal Filter Assy.
B598000002 Fresh Water Flush Sys. 12/99
 
SYSTEM GPH/LPH GPD/LPD
350 GPD Seafari 15 / 55 350/1325
350 Seafari Sailor Package A $742 Value which includes:
H2521210001 Charcoal Filter Assy.
B598000002 Fresh Water Flush Sys. 12/99
 
170 & 350
 U.S. gallons per day
 (644 & 1,325 Liters)
7 & 15
 U.S. gallons per hour
 (26 & 55 Liters)
Specifications
Product Water Produced
per hour of operation:		             +-15% 850 psi / 59 Bar, 77oF / 25oC & 35,000 ppm TDS typical sea water

Model
Production Per Hour
Production Per 24 Hours
 
gallons/liters
gallons/liters
SF170
7 / 27
170 / 644
SF 350
15 / 55
350 / 1,325
Salt Rejection (Chloride Ion):

Product Water Temp.:

Salinity Monitoring:



Salinity Range


Temperature Range:

System Feed Water:

Reverse Osmosis Membrane:


Chlorine Tolerance:

pH Range:

System Pressure:






External Installation
Water Connections:		 Minimum 99.2%, Average 99.4%

Ambient to feed water temperature

The salinity monitoring components of the system give a continuous readout in micromhos per cubic centimeter, are temperature compensated, and of a
fail safe design.

Designed for seawater use up to 50,000 ppm TDS (Nacl)
(typical seawater salinity is 35,000 ppm.)

Min. 33oF / .5oC Max. 122oF / 33oC

Flow: 50Hz, .42 gpm/1.59 lpm; 60Hz, .5 gpm/1.89 lpm

High Rejection/High Yield aromatic tri-polyamind, thin film composite, spiral wound, single pass reverse osmosis membrane element.

0.1 ppm

3-11 (typical seawater pH is 8)

Feed Water: Minimum: 2 psi /   .14 bar /   .14 Kg/cm2
Maximum: 30 psi / 2.07 bar / 2.11 Kg/cm2
System Operation: Seawater @ 35,000 ppm & 77oF/25oC
Nominal: 850 psi / 59 bar / 59.7 Kg/cm2. (Brackish varies w/ppm)


Pipe sizes to be supplied by the installer for connection of the HRO Systems supplied components.
Feed Inlet: 3/8" Tube (Parker Fast & Tite Fittings)
Brine Discharge: 3/8" Tube (Parker Fast & Tite Fittings)
Product: 1/4" Tube (Parker Fast & Tite Fittings)

Electrical Motor Specifications:

(H.P. = Horse Power; FLA = Full Load Amperes; LRA=Locked Rotor Amperes @ Start Up)

Alternating Current Systems:

Hz VAC HP FLA LRA
50     110         .333 6 26
50 220 .333 3 13
60 115 .333 6 26
60 230 .333 3 13

Booster Pump Motors:

Hz VAC HP FLA LRA
50/60 115 .125 4 20
50/60 220/230 .125 2 10

Direct Current Systems:

High Pressure Motor             Booster Pump Motor

VDC HP FLA VDC HP FLA
12 .33 29   12 .125 3
24 .33 14 24 .125 2

Recommended Circuit Breaker:

Operating Voltage

Rec. Circuit Breaker Size

12 VDC
24 VDC
115 VAC
230 VAC

40 Amps
20 Amps
10 Amps
5-7.5 Amps

Features and Benefits
  • Twenty-six years of marine reverse osmosis experience.
  • Extremely quiet, smooth, and with complete vibration isolation.
  • Ideal for small and midsize power or sail boats.
  • Exclusive Solid Salinity Meter, an essential tool for product water monitoring.
  • A failsafe Product Water Diversion Valve allows only safe drinking water to enter storage tanks.
  • Reverse Osmosis Membranes are high rejection, high yield, commercial grade, and chemically resistant.
  • Clear viewable Sea Strainer with a cleanable Monel Mesh Screen filter for ultimate corrosion resistance and large particulate removal.
  • Exclusive high efficiency Booster Pump
  • Micro Processor Controlled Electronics provide state of the art technology and reliability with weekly Automatic Fresh Water Flush Timing (optional).
  • Stainless Steel, liquid filled exterior and interior Pressure Gauges for accurate measurement of system functions and corrosion resistance.
  • New Flow Meter for visual monitoring of the product water flow
  • All High Pressure Connections are composite 316L Stainless Steel for maximum corrosion and rust resistance.
  • Water Quality Indication LED
  • A comprehensive manual with exploded part views and and connection drawings for installation, operation, and maintenance.
  • Worldwide Service and Sales Network
  • One-Year Warranty on the System and Membranes.
  • Technical service and repair department dedicated to system performance excellence.
Go to Accessories
Go to Consumables

Back to the Watermakers Catalog

 
Marine Industries Association of South Florida Use the email links below or our Inquiry Form for more info.
We offer our services in English, Portuguese, and Spanish for your convenience.

{ Home | Watermakers/Parts | Service | Ft. Laud. | Palm Beach | Savannah }
{ News | Contact | Email | Links }

 
 
Fort Lauderdale 954-463-2288 Toll Free: 800-663-7561 [email]
Palm Beaches 561-881-9598 Toll Free: 800-348-9637 [email]
Savannah, GA 912-356-5222 Toll Free: 800-286-2674 [email]